Introduction
This is an E Ink display controller device designed to be used with a touchscreen. It features the ESP32-S3-WROOM-1-N16R18 controller with 16MB Flash and 8MB PSRAM built-in. The front side includes a 4.7-inch E Ink display with a resolution of 540×960, supporting 16-level grayscale and partial refresh.
In comparison to a regular LCD screen, an E Ink display provides users with a better text reading experience, along with low power consumption and image retention when powered off. It also includes a 6-pin touchscreen interface for optional accessories, catering to your specific application needs. On the side, there are 3 reserved buttons, with 2 customizable buttons for flexible functionality and one reset button. Additionally, it features a 40-pin header compatible with Raspberry Pi’s BUS interface. On the back, there is a PH 2.0 spaced 3.7V battery socket.
Board-Overview
Applications
Desktop weather station
STEM education
IoT equipment
Shelf label
Message board
Specification
Controller: ESP32-S3-WROOM-1-N16R18
Flash: 16MB
PSRAM: 8MB
Resolution: 540(H)960(V)
Display Grayscale Level: 16 levels
Custom Buttons: 2
Battery Connector: PH 2.0 interface
Battery Charge and Discharge Protection Chip: HX6610S
Display Size: 4.7 inches
Partial Refresh: support
Touch Screen Interface: 6pin touch screen interface
Shipping List
ESP32-S3 4.7-inch E Ink display 1
Power cable x1
40-pin header x1
Documents
Product wiki